PMMA mini fiber ceiling kit for hotel lighting

1,mini fiber ceiling kit for the Hotel Ceiling Decoration 2,,DIY 3,twinkle starry effect 4,hotel ,KTV, home,bathroom fiber star ceiling kit for the hotel Ceiling Decoration

1,DIY2,twinkle starry effect3,hotel ,KTV, home and bathroom decoration

 LED light engine + PMMA optic fiber +fiber optic end fitting

make the beautiful fiber light yourself

Safety information:

Our fiber optic lighting kits carries no heat or electricity, making them safe to touch and perfect for wet or humid environments where conventional lighting would be dangerous. Please be noted that the light source is not waterproof and must be installed in a watertight area. Waterproof enclosures are available if required.

fiber diameter:0.75mm,1.0mm,1.5mm,2.0mm(on customer's demand)

fiber quantity:100-1000pieces

LED light source:16w,32w,27w,45w

Halogen light source:100w,150w

we will give you our professional suggestion

The whole rolls

Model	Light Engine	Mixed fiber QTY and Dia	Fiber length	Cover square	Average star points/square meter
TX-1-001	16W LED light engine	150pcs:0.75mm	2m	2*2m	38
TX-1-002	16W LED light engine	200pcs:0.75mm	2m	2*2m	50
TX-1-003	16W LED light engine	150pcs:1.0mm	2m	2*2m	38
TX-1-004	16W LED light engine	200pcs:1.0mm	2m	2*2m	50
Model	Light Engine	Mixed fiber QTY and Dia	Fiber length	Cover square	Average star points/square meter
TX-2-001	16W LED light engine	60pcs:0.75mm, 60pcs:1.0mm	2m	2*2m	30
TX-2-002	16W LED light engine	80pcs:0.75mm, 80pcs:1.0mm	3m	2*3m	26
TX-2-003	16W LED light engine	110pcs:0.75mm, 110pcs:1.0mm	3m	3*3m	24
TX-2-004	16W LED light engine	140pcs:0.75mm, 140pcs:1.0mm	4m	4*4m	17
Model	Light Engine	Mixed fiber QTY and Dia	Fiber length	Cover square	Average star points/square meter
TX-3-001	16W LED light engine	100pcs:0.75mm, 80pcs:1.0mm, 8pcs:1.5mm, with 8pcs crystal end fitting	2m	2*2m	47
TX-3-002	16W LED light engine	150pcs:0.75mm, 80pcs:1.0mm, 8pcs:1.5mm, with 8pcs crystal end fitting	3m	2*3m	40
TX-3-003	16W LED light engine	200pcs:0.75mm, 100pcs:1.0mm, 8pcs:1.5mm, with 8pcs crystal end fitting	3m	3*3m	34
TX-3-004	16W LED light engine	240pcs:0.75mm, 100pcs:1.0mm, 8pcs:1.5mm, with 8pcs crystal end fitting	4m	3*4m	28

Note: we do not suggest the use of the superglue as it can cause the fiber tails become brittle and prior to breakage,

resulting in a loss of light. Please install each illuminator in an accessible location that allows each cable to reach the

ceiling with 60cm of slack.

Step1:

Drill a small holes’ size same as the diameter of end fitting on the ceiling.

Step 2:

Insert the end piece through the hole from the below ceilling and screw it.

Step 3:

Insert the fiber cable into the end fitting and secure the fiber cable in place with silicone sealant. Allow the sealant to dry. 

Step 4:

Insert the plug into the power socket. It is all completed. 

PMMA mini fiber ceiling kit for hotel lighting